HYW-1095 T6

 

HYW-1095 T6

1280 kVA Generator set Open Skid

Powered by: YANMAR
Alternator: STAMFORD

 

Three phase | 60 Hz | Diesel |

 

 

  • Engine Specifications 1.800 r.p.m.
  • Rated Engine Output: 1071,9kW prp ; 1144,9kW standby
  • Manufacturer: YANMAR
  • Model: AY40L.ET
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 12-V
  • Bore and Stroke: 155 x 180 mm
  • Displacement: 40,76 L
  • Cooling System: Coolant
  • Lube Oil Specifications: API CF or CH4, SAE 15W-40
  • Compression Ratio: 14,35;1
  • Fuel Consumption 100% PRP: 275 l/h
  • Fuel Consumption 75 % PRP: 211,3 l/h
  • Fuel Consumption 50 % PRP: 149,6 l/h
  • Fuel Consumption 25 % PRP: 90,6 l/h
  • Lube oil consumption with full load: 0,75
  • Total oil capacity including tubes, filters 190 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 205 mm
  • Oil temperature sensor
  • Low coolant level sensor
  • Exhaust gas compensator
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Standard air filter
  • Standard fuel filter
  • Standard oil filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
  • Water separator filter (visible level) (Optional)
  • Generator: STAMFORD
  • Model: HCI634K
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-00 21"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
  • - OPEN SET VERSION.
  • Steel chassis
  • Emergency stop button
  • Oil sump extraction kit
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Manual oil drain pump
  • High mechanical strength
  • Fuel tank drain plug
  • Fuel transfer pump (Optional)
  • Steel industrial silencer -15db(A) attenuation (Optional)
  • Steel residential silencer -35db(A) attenuation. (Optional)
  • - ELECTRICAL SYSTEM.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
  • Maintenance-free and anti-explosion battery
  • Battery Switch
  • Control panel and emergency stop button
  • Battery charger (standard on gensets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • Heating resistor (standard on sets with automatic control panels) (Optional)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 455 ºC
  • Exhaust Gas Flow: 256,3 m3/min
  • Maximum allowed back pressure: 6 kPa
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 5862 m3/h
  • Cooling Air Flow: 26,88 m3/s
  • Alternator fan air flow: 1,961 m3/s
  • - STARTING SYSTEM.
  • Starting power: 8 kW
  • Starting power: 10,88 CV
  • Recommended battery: 75 x 4 Ah
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 400 L
  • - DIMENSIONS.
  • Length: 4.450 mm
  • Height: 2.313 mm
  • Width: 2.100 mm
  • Maximum shipping volume: 21,61 m3
  • Fuel tank capacity: 400 L
  • Autonomy: 2 Hours

Power


kVA

1280
 
1364
Prime power  (6 - 2601)
Stand by  (6.5 - 2627)

kW

1024
 
1091
Prime power  (5.8 - 2081)
Stand by  (6.2 - 2093)
 

Sound level

 dB
 Distance (m)

 
 

dimensions


 
dimensions
Long (A)
445
Width (B)
210
High (C)
231,30
 

Weight


 
Weight
Weight with liquid in radiator and carter

0
 

Fuel capacity


 
 
400