HYW-200 T5

 

HYW-200 T5

200 kVA Generator set Open Skid

Powered by: YANMAR
Alternator: MECC ALTE

 

Three phase | 50 Hz | Diesel |

 

 

Engine
  • Engine Specifications 1.500 r.p.m.
  • Rated Engine Output: 176,5kW prp ; 194kW standby
  • Manufacturer: YANMAR
  • Model: 6F104TM7.GL
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 6-L
  • Bore and Stroke: 104 x 132 mm
  • Displacement: 6,7 L
  • Cooling System: Liquid (water + 50% glycol)
  • Lube Oil Specifications: ACEA E3 - E5
  • Compression Ratio: 17,5:1
  • Fuel Consumption ESP: 49 l/h
  • Fuel Consumption 100% PRP: 42,1 l/h
  • Fuel Consumption 80 % PRP: 37,3 l/h
  • Fuel Consumption 50 % PRP: 24 l/h
  • Lube oil consumption with full load: 0,5 % of fuel consumption
  • Total oil capacity including tubes, filters 17,2 L
  • Total coolant capacity: 25,5 L
  • Governor Type Mechanical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 70,3 mm
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 12V electrical system
  • Water separator filter (no visible level)
  • Dry air filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Mechanical governor
  • Hot parts protection
  • Moving parts protection
Alternator
  • Generator: MECC ALTE
  • Model: ECO38 2S/4 A
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-3 11"1/2
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
Version
  • - OPEN SET VERSION.
  • Steel chassis
  • Emergency stop button
  • Oil sump extraction kit
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • High mechanical strength
  • Epoxy polyester powder coating
  • Fuel tank drain plug
  • Steel industrial silencer -15db(A) attenuation
  • Fuel transfer pump (Optional)
  • Steel residential silencer -35db(A) attenuation. (Optional)
Installation
  • - ELECTRICAL SYSTEM.
  • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
  • Battery Switch
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger (standard on gensets with automatic control panels)
  • Heating resistor (standard on sets with automatic control panels)
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 600 ºC
  • Maximum allowed back pressure: 5 kPa
  • Heat dissipated by exhaust pipe: 598 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 586 m3/h
  • Cooling Air Flow: 3,8 m3/s
  • Alternator fan air flow: 0,533 m3/s
  • - STARTING SYSTEM.
  • Starting power: 3 kW
  • Starting power: 4,08 CV
  • Auxiliary Voltage: 12 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 250 L
Dimensions
  • - DIMENSIONS.
  • Length: 2.900 mm
  • Height: 1.634 mm
  • Width: 900 mm
  • Maximum shipping volume: 4,26 m3
  • Weight with liquids in radiator and sump: 1.558 kg
  • Fuel tank capacity: 250 L
  • Autonomy: 7 Hours

Power

kVA

200
 
220
Prime power  (6 - 2601)
Stand by  (6.5 - 2627)

kW

160
 
176
Prime power  (5.8 - 2081)
Stand by  (6.2 - 2093)
 

Sound level

 dB
 Distance (m)
 
 

dimensions

 
dimensions
Long (A)
290
Width (B)
90
High (C)
163,40
 

Weight

 
Weight
Weight with liquid in radiator and carter
1.558
 

Fuel capacity

 
 
250
 
Back