HRSW-505 T5

 

HRSW-505 T5

501 kVA Generator set Rental

Powered by: SCANIA
Alternator: STAMFORD

 

Three phase | 50 Hz | Diesel | Stage 3A

 

 

Engine
  • Engine Specifications 1.500 r.p.m.
  • Rated Engine Output: 425kW prp
  • Manufacturer: SCANIA
  • Model: DC16-71A(02-01)
  • Engine Type: 4-stroke diesel
  • Injection Type: Direct
  • Aspiration Type: Turbocharged and after-cooled
  • Number of cylinders and arrangement: 90º V8
  • Bore and Stroke: 130 x 154 mm
  • Displacement: 16,4 L
  • Cooling System: Coolant
  • Lube Oil Specifications: ACEA E3,E4,E5 or E7
  • Compression Ratio: 16,7:1
  • Fuel Consumption 100% PRP: 103,9 l/h
  • Fuel Consumption 75 % PRP: 80,22 l/h
  • Fuel Consumption 50 % PRP: 53,73 l/h
  • Lube oil consumption with full load: 0,3
  • Total oil capacity: 48 L
  • Total coolant capacity: 70 L
  • Governor Type Electrical
  • Air Filter Type Dry
  • Inner diameter exhaust pipe: 104 mm
  • Diesel engine
  • 4-stroke cycle
  • Water-cooled
  • 24V electrical system
  • Water separator filter (visible level)
  • Dry air filter
  • Radiator with pusher fan
  • Radiator water level sensor
  • HTW sender
  • LOP sender
  • Electronic governor
  • Hot parts protection
  • Moving parts protection
Alternator
  • Generator: STAMFORD
  • Model: HCI544D
  • Poles: 4
  • Connection type (standard): Star-series
  • Mounting type: S-1 14"
  • Insulation: H class
  • Enclosure (according IEC-34-5): IP23
  • Exciter system: Self-excited, brushless
  • Voltage regulator: A.V.R. (Electronic)
  • Bracket type: Single bearing
  • Coupling system: Flexible disc
  • Coating type: Standard (Vacuum impregnation)
Version
  • - SOUNDPROOFED VERSION.
  • Steel chassis
  • Anti-leakage chassis, predisposed to retain liquids (retention tray)
  • High capacity fuel tank, with contention base and easy external filling
  • Manhole for fuel tank cleaning and drainage
  • Manhole for chassis cleaning
  • Oversized chassis to protect the bodywork
  • Slide carriage and brackets for transportation with forklift
  • Tilting cap in the exhaust
  • Manhole to fill the radiator
  • Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
  • Anti-vibration shock absorbers
  • Chassis with integrated fuel tank
  • Fuel level gauge
  • Bodywork made from high quality steel plate
  • High mechanical strength
  • Low noise emissions level
  • Soundproofing provided by high-density volcanic rock wool
  • Epoxy polyester powder coating
  • Full access for maintenance (water, oil and filters, no need to remove the canopy)
  • Reinforced lifting hooks for crane hoisting
  • Steel residential silencer -35db(A) attenuation.
  • Oil sump extraction kit
  • External filling of the fuel tank with safety key
  • Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
  • Mechanized for power cable output
  • Door with window to visualize control panel, alarms and measurements
  • Pressure locks
  • IP Protection according to ISO 8528-13:2016
  • 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
  • Aditional silencer (Optional)
  • Fuel transfer pump (Optional)
Installation
  • - ELECTRICAL SYSTEM.
  • M5 control panel with electronic CEM7 control unit and switched emergency stop
  • Power panel with built-in circuit breaker plates
  • Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
  • Battery Switch
  • M12 control panel with electronic DSE 7310 control unit and switched emergency stop
  • Socket boxs IP67
  • Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection
  • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
  • Battery charger alternator with ground connection
  • Starter battery/ies installed (cables and bracket included)
  • Ground connection electrical installation with connection ready for ground spike (not supplied)
  • - EXHAUST SYSTEM.
  • Maximum exhaust temperature: 524 ºC
  • Exhaust Gas Flow: 0,55 kg/s
  • Maximum allowed back pressure: 100 mbar
  • Exhaust Flange Size (external diameter): 160 mm
  • Heat dissipated by exhaust pipe: 603,21 KCal/Kwh
  • - NECESSARY AMOUNT OF AIR.
  • Intake air flow: 1600 m3/h
  • Cooling Air Flow: 14,17 m3/s
  • Alternator fan air flow: 1,035 m3/s
  • - STARTING SYSTEM.
  • Starting power: 7 kW
  • Starting power: 9,52 CV
  • Auxiliary Voltage: 24 Vdc
  • - FUEL SYSTEM
  • Fuel Oil Specifications: Diesel
  • Fuel Tank: 2.000 L
Dimensions
  • - DIMENSIONS.
  • Length: 4.602 mm
  • Height: 2.809 mm
  • Width: 1.850 mm
  • Maximum shipping volume: 23,91 m3
  • Weight with liquids in radiator and sump: 5.994 kg
  • Fuel tank capacity: 2.000 L
  • Autonomy: 25 Hours
  • Sound pressure level: 76 ± 2,4 dB(A)@7m

Power

kVA

501
 
550
Prime power  (250 - 735)
Stand by  (275 - 807)

kW

401
 
440
Prime power  (200 - 588)
Stand by  (220 - 646)
 

Sound level

 dB
 Distance (m)
 
 

dimensions

 
dimensions
Long (A)
460,20
Width (B)
185
High (C)
280,90
 

Weight

 
Weight
Weight with liquid in radiator and carter
5.994
 

Fuel capacity

 
 
2.000
 
Back